95lb (1000cc) Bosch EV14 Fuel injectors – Corvette LS2, Chevy GMC Truck 4.8L 5.3L 6.0L

Set of 8 NEW 95lb/hr (1000cc) BOSCH EV14 fuel injectors, rated 105lb (1100cc) at GM 58psi fuel pressure. These are a DIRECT FIT for the GM LS2 fuel rail and harness. GM tucks with the 4.8L, 5.3L and 6.0L engine will require the use of 1/4″ fuel rail spacers, and EV6/USCAR electrical connectors (can be purchased separately), unless LMG, L59, or TBSS application. Aftermarket intake manifolds, and fuel rail combinations may require height adapter hats, or fuel rail spacers.

Each set is supplied with its own unique flow sheet, with individual injector flow data.

This set has been custom milled from NEW, genuine Bosch cores, and flow matched to less than +/- 2%. We match our injectors both statically, and dynamically for optimal performance, smooth idle, and easy tune-ability. Fuel discharge is through a single hole with a medium cone spray pattern for superior fuel atomization. These are compatible with ALL KNOWN FUELS. This set can support up to 1200bhp at 90% duty (4bar Fuel Pressure) on pump gas.

These are NOT and OE replacement injector, but rather, intended for use in highly modified engines.

APPLICATIONS:

– 2005-2007 Corvette LS2 (direct fit)
– Chevy/GMC 4.8L, 5.3L & 6.0L LS based truck engines. (will require 1/4″ fuel rail spacers – and electrical connectors if non flex fuel engine)

FLOW RATES & Specs:
Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Spray Pattern: Medium Cone, (single hole orifice)
Electrical Connector: USCAR (New-style EV6 / Oval / LS2)
Fitted with Viton upper and lower o-rings.
Static Flow Rate @ 43.5PSI (300kPa): 95lb/hr = 1000cc/min
Overall Length: 65.5mm
Dimensions: 48.5mm o-ring seat to seat, 53.5mm o-ring centerline to centerline

This set is guaranteed to work just like new right out of the box, or your money back. They are also covered by our best 2yr unlimited mile warranty.