$439.99 plus GST/HST
4 – 1000cc BOSCH EV14 Fuel Injectors
VW/AUDI 1.8T fitment
________________________________________
Looking for a larger injector for your high power Audi/VW 1.8t? Up for sale is a set of 4 NEW 1000cc/min Bosch EV14 Fuel injectors. These injectors will fit the Audi/VW 1.8t applications listed below. Included with the injectors are the proper USCAR to EV1 electrical adapters to make them a DIRECT FIT.
The BOSCH EV14 injector offers fast response times, and predictable flow down to 2ms. They also maintain linear flow up to 8bar fuel pressure. A perfect match for small to medium displacement engines making big power. These are compatible with ALL KNOWN FUELS. This set can support up to 550bhp @ 80% duty (3bar Fuel Pressure), and over 600bhp at 4bar.
This set has been custom milled from NEW, genuine Bosch cores, and flow matched to less than 2%. We match our injectors both statically, and dynamically for optimal performance, smooth idle, and easy tune-ability. Each set is accompanied by a table with all the necessary tuning information(dead time, voltage offset, latency, etc). Fuel discharge is through a single hole with a medium cone spray pattern for superior fuel atomization.
This set is covered by our best 1yr warranty, against electrical and mechanical defects.
Applications:
AUDI:
– 97-99.5 Audi A4 1.8T (AEB engine code)
– 02 A4 1.8T (AMB engine code) MUST USE RAIL SPACERS
VW:
– 97-99 Passat 1.8T (AEB engine code)
– 01 Passat 1.8T (AWM engine code) MUST USE RAIL SPACERS
– 00-04 Passat 1.8T (AMB engine code) MUST USE RAIL SPACERS
– 01′ Golf/Jetta 1.8T (AWW engine code) MUST USE RAIL SPACERS
– 00′ Golf/Jetta 1.8T (AWP engine code) MUST USE RAIL SPACERS
FLOW RATES & Specs:
Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Fuel type: Compatible with all known fuels
Spray Pattern: medium Cone, (single orifice)
Electrical Connector: USCAR
Fitted with Viton upper and lower o-rings.
Static Flow Rate (gasoline) @ 43.5PSI (300kPa): 95 lb/hr = 6.52g/s = 1000cc/min (900cc/min w/ n-Heptane)
Overall Length: 65.5mm
Dimensions: 48.5mm o-ring seat to seat, 53.5mm o-ring centerline to centerline
If you have any questions please feel free to ask. We are here to help. Thanks for looking!
Out of stock
|
SHIPPING COSTS, transit times, & GST: Canada – $19.00 for Canada Post (tracked, 3-5 business days) 48 United States – $24.00 (8-12 BUSINESS days) SHIPPING YOUR ITEM: * Actual injectors may vary. Stock Photo. Filters and pintle caps may vary in design and color. |
