8 – 80lb (875cc) genuine DEKA fuel Injectors
Be careful for other vendors with knock-offs!
BRAND NEW w/ 2yr Warranty
_____________________________________________
This listing is for a set of 8 NEW Flow matched 80lb (875cc) DEKA fuel injectors, rated roughly 100lb (1050cc) at GM 58psi fuel pressure. Also included are 8 electrical adapters for correct harness fitment. We can also substitute the pin in style EV1 connectors if you prefer. These are a DIRECT FIT for the GM applications listed below. Aftermarket intake manifolds, and fuel rail combinations may require the use of height adapter hats.
Each set is supplied with its own unique flow sheet, with individual injector flow data.
These are NEW, genuine DEKA injectors flow matched to less than +/- 2%. We match our injectors both statically, and dynamically for optimal performance, smooth idle, and easy tune-ability. This set will support up to 1150bhp at 90% duty (4bar Fuel Pressure) on gasoline. These are all fuel compatible.
These are NOT and OE replacement injector, but rather, intended for use in highly modified engines.
APPLICATIONS:
– GM LS3, LS4, LS7, LS9, L76, L77,L99, & LSA – Corvette, CTS-V, Camaro, G8, etc.
– Chevy/GMC LS based truck engines – L94, L9H (will fit other truck engines with use of height adapters and electrical connectors)
– Can be adapted to other GM LS engines with the use of adapter hats, and electrical connectors/adapters – PLEASE CONTACT US FOR FITMENT
FLOW RATES & Specs:
Coil Resistance: 12.5 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Spray Pattern: Medium Cone, (9 hole orifice)
Electrical Connector: EV1 (Jetronic)
Fitted with Viton upper and lower o-rings.
Static Flow Rate @ 43.5PSI (300kPa): 83lb/hr = 875cc/min
Overall Length: 45mm
Dimensions: 34mm o-ring seat to seat, 38mm o-ring centerline to centerline
This set is guaranteed to work just like new right out of the box, or your money back. They are also covered by our best 2yr unlimited mile warranty.