720cc Bosch Fuel injectors FITS Nissan 350z 370z Maxima Altima VQ30 VQ35 VH37

6 – 720cc Nissan VQ30DEK/VQ35/VQ37 Fuel Injectors

ASNU Flow tested  – 2yr Warranty  _____________________________________________

Looking for a larger injector for your high power Nissan 6cly engine? Up for auction is a set of 6 NEW 720cc/min BOSCH fuel injectors to fit the Nissan applications listed below. These are a DIRECT FIT for rail and harness found in the applications listed below. They are HIGH impedance so they are also compatible with all aftermarket ECU, as well as your factory Nissan ECU.

These are UNMODIFIED Bosch injectors, with the multi-hole orifice, for superior atomization.

The BOSCH EV14 injector offers fast response times, and predictable flow down to 2ms. They also maintain linear flow up to 8bar fuel pressure. A perfect match for small to medium displacement engines making big power. These are compatible with ALL KNOWN FUELS. This set can support up to 650bhp @ 90% duty (3bar Fuel Pressure), and over 740bhp at 4bar.

Each set is accompanied by a table with all the necessary tuning information(dead time, voltage offset, latency, etc). 

APPLICATIONS- DIRECT FIT:

Nissan:
– 03-09 Nissan 350z (VQ35DE/VQ35HR)
– 09+ Nissan 370z (VQ37VHR)
– 02+ Nissan Altima SR/SE-R (VQ35DE)
– 02+ Nissan Maxima (VQ35DE)
– 00-01 Nissan Maxima (VQ30DE-K)

Specs:
Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Spray Pattern: Medium Cone, (9 orifice)
Electrical Connector: Sumitomo (Denso)
Fitted with Viton upper and lower o-rings.
Static Flow Rate @ 43.5PSI (300kPa): 68.47 lb/hr = 8.627g/s = 720cc/min
Overall Length: 65.5mm (aka 48mm)
Dimensions: 48.5mm o-ring seat to seat, 53.5mm o-ring centerline to centerline

This set if guaranteed to work just like new right out of the box, or your money back. They are also covered by our best 2yr unlimited mile warranty.