6 – 550cc Bosch EV14 Fuel injectors FITS Toyota 1G-FE 2.0L IS 200 Altezza

6 – 550cc Bosch EV14 fuel injectors

ASNU Flow tested  – 2yr Warranty  _____________________________________________

Looking for a larger injector for your boosted 1G-FE Toyota? Up for sale is a set of 6 NEW 550cc/min BOSCH fuel injectors. These are a DIRECT FIT for rail, manifold found in the applications listed below. They are HIGH impedance so they are compatible with all aftermarket ECU’s, as well as your factory ecu.

These are UNMODIFIED Bosch injectors, with the multi-hole orifice, for superior atomization.

The BOSCH EV14 injector offers fast response times, and predictable flow down to 2ms. They also maintain linear flow up to 8bar fuel pressure. A perfect match for small to medium displacement engines making big power. These are compatible with ALL KNOWN FUELS. This set can support up to 500bhp @ 90% duty (3bar Fuel Pressure), and over 540bhp at 4bar.

Each set is accompanied by a table with all the necessary tuning information(dead time, voltage offset, latency, etc).

APPLICATIONS- DIRECT FIT:

– Toyota 1G-FE engine (Altezza, IS 200, Crown, Chaser, Mark II, Cresta)

What’s included:
– 6 x Bosch EV14 550cc fuel injectors
– 6 x Pin-in style USCAR electrical connectors
– Tuning info

Specs:
Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Spray Pattern: Wide Split Cone, (6 orifice)
Electrical Connector: USCAR (New-style V=EV6 / Oval / LS2)
Fitted with Viton upper and lower o-rings.
Static Flow Rate @ 43.5PSI (300kPa): 52lb/hr = 550cc/min
Overall Length: 65.5mm
Dimensions: 48.5mm o-ring seat to seat, 53.5mm o-ring centerline to centerline

This set if guaranteed to work just like new right out of the box, or your money back. They are also covered by our best 2yr unlimited mile warranty.