6 – 1000cc BOSCH EV14 Fuel Injectors Toyota 1JZGTE 2JZGE 7MGTE Supra Soarer

6 – 1000cc Bosch EV14 Fuel Injectors WITH clips!

ASNU flow matched – W/ 1yr Warranty!

__________________________________________

Looking for a larger injector for your high powered Toyota? Up for sale is a set of six (6) high performance BOSCH EV14 – 1000cc/min fuel injectors. These are HIGH IMPEDANCE so NO resistor boxes are necessary! These injectors have an 11.5mm top o-ring suitable for 11mm fuel rails. Also included are the proper EV6/USCAR electrical clips to PIN into your harness for an OEM look, NO SPLICING REQUIRED!

These BOSCH EV14 injectors are compatible with all known fuels, including alcohol and E85. They offer fast response times, predictable flow down to 2ms, and maintain linear flow up to 8 BAR fuel pressure. Great for small-medium displacement engines making big power. This set can support up to 900bhp @ 90% duty(3bar FP), and over 1000bhp at 4bar.

This set is custom milled from NEW Bosch cores and flow matched to less than 2% (static & dynamic) for optimal idle, and drivability. Fuel discharge is through a single hole with a medium cone spray pattern for superior fuel atomization. These injectors are covered by our best 2yr unlimited mile warranty.

We supply all of the necessary tuning information with these injectors!

SOME top feed Applications:
– 7M-GE
– 7M-GTE
– 1G-GTE/GZE
– 93-95 Supra MKIV 2JZ-GE (NA-T)
– 1JZ-GTE VVTi ONLY

WITH 11mm top feed fuel rail conversion:
– 1JZ-GTE non-VVTi
– 2JZ-GTE (both VVTi & non)

Please inquire if you do not see your application, we do not have them all listed.

SPECS:
Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Spray Pattern: Wide Split Cone, (single orifice)
Electrical Connector: USCAR (New-style V=EV6 / Oval / LS2)
Fitted with Viton upper and lower o-rings.
Static Flow Rate @ 43.5PSI (300kPa): 95 lb/hr = 6.52g/s = 1000cc/min
Overall Length: 65.5mm
Dimensions: 48.5mm o-ring seat to seat, 53.5mm o-ring centerline to centerline

If you have any questions please feel free to ask. We are here to help.Thanks for looking!