1000cc BOSCH EV14 Fuel Injectors Honda OBD0 OBD1 B Series Civic Integra B16 B18

4 – 1000cc Bosch EV14 Fuel Injectors

ASNU flow matched – W/ 1yr Warranty!

__________________________________________

The pictures of the item may be different from the actual item you receive. This is in an effort to deter others from copying the design.

Looking for a larger injector for your high powered OBD0/OBD1 B-Series Honda engine? Up for sale is a set of four(4) high performance BOSCH EV14 – 1000cc/min fuel injectors. These are HIGH IMPEDANCE so NO resistor boxes are necessary! If you have a resistor box from factory, you must bypass it. Also included are the proper USCAR to OBD0/OBD1 electrical adapters for a direct fit, NO SPLICING REQUIRED!

These BOSCH EV14 injectors are compatible with all known fuels, including alcohol and E85. They offer fast response times, predictable flow down to 2ms, and maintain linear flow up to 8 BAR fuel pressure. Great for small-medium displacement engines making big power. This set can support up to 600bhp @ 90% duty(3bar FP), and over 680bhp at 4bar.

This set is custom milled from NEW Bosch cores and flow matched to less than 2% (static & dynamic) for optimal idle, and drivability. Fuel discharge is through a single hole with a medium cone spray pattern for superior fuel atomization. These injectors are covered by our best 2yr unlimited mile warranty.

Applications:
Honda fitment guide:
– 1988-1991 Civic/Crx – Remove/bypass resistor box
– 1992-1995 Civic/Del Sol
– 1990-1991 Integra – Remove/bypass resistor box
– 1992-1995 Integra 
– Will Also fit all OBD0 & OBD1 JDM B-series engines.

FLOW RATES & Specs:
Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Spray Pattern: Wide Split Cone, (single orifice)
Electrical Connector: USCAR
Fitted with Viton upper and lower o-rings.
Static Flow Rate (gasoline) @ 43.5PSI (300kPa): 95 lb/hr = 6.52g/s = 1000cc/min (900cc/min with n-Heptane)
Overall Length: 65.5mm
Dimensions: 48.5mm o-ring seat to seat, 53.5mm o-ring centerline to centerline

If you have any questions please feel free to ask. We are here to help.Thanks for looking!