1000cc BOSCH Fuel Injectors OBD2 Honda B Series Civic Integra – FREE VTEC COVER!

4 NEW 1000cc Bosch EV14 Fuel Injectors

ASNU flow matched – W/ 1yr Warranty!

__________________________________________

FOR A LIMITED TIME ONLY WE ARE INCLUDING ONE FREE VTEC SOLENOID COVER WITH THE PURCHASE OF THESE INJECTORS! LIMITED TO THE COLORS PICTURED, AND SUBJECT TO AVAILABILITY!

Looking for a larger injector for your high powered OBD2 Honda engine? Up for sale is a set of four(4) high performance BOSCH EV14 – 1000cc/min fuel injectors. These are HIGH IMPEDANCE so NO resistor boxes are necessary! If you have a resistor box from factory, you must bypass it. Also included are the proper USCAR to OBD2 electrical adapters for a direct fit, NO SPLICING REQUIRED! We also include the proper tuning information for this set.

These BOSCH EV14 injectors are compatible with all known fuels, including alcohol and E85. They offer fast response times, predictable flow down to 2ms, and maintain linear flow up to 8 BAR fuel pressure. Great for small-medium displacement engines making big power. This set can support up to 600bhp @ 90% duty(3bar FP), and over 680bhp at 4bar.

This set is custom milled from NEW Bosch cores and flow matched to less than 2% (static & dynamic) for optimal idle, and drivability. Fuel discharge is through a single hole with a medium cone spray pattern for superior fuel atomization. These injectors are covered by our best 2yr unlimited mile warranty.

IMPORTANT FITMENT INFORMATION:
We supply printed installation tips/instructions for all of our Honda injectors. Because of the variety of Honda intake manifolds, there are different installation procedures for different applications.

Applications:
Honda fitment guide:
– 1996-2000 CIVIC/DEL SOL (ALL TRIMS)
– 1996-2000 INTEGRA (ALL TRIMS)

FLOW RATES & Specs:
Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Spray Pattern: Wide Cone, (single orifice)
Electrical Connector: USCAR
Fitted with Viton upper and lower o-rings.
Static Flow Rate (gasoline) @ 43.5PSI (300kPa): 95 lb/hr = 6.52g/s = 1000cc/min (900cc/min with n-Heptane)
Overall Length: 65.5mm
Dimensions: 48.5mm o-ring seat to seat, 53.5mm o-ring centerline to centerline

If you have any questions please feel free to ask. We are here to help.Thanks for looking!