1000cc BOSCH EV14 Fuel Injectors FITS 2006-2011 Honda Civic Si K20 K20Z3

Up for sale is a set of four (4) NEW BOSCH / PFi – 1000cc/min fuel injectors, designed for use with the Honda K20 engines found in the application list below. Also supplied with this set are the proper electrical adapters from USCAR to Honda OBD2, for a hassle free installation.

This set is custom milled from NEW Bosch cores and flow matched to less than +/- 2% (static & dynamic) for optimal idle, performance and drivability. These injectors are covered by our best 2yr unlimited mile warranty against electrical and mechanical defects.

Bosch EV14 / PFI injector key benefits:
– High impedance – compatible with both OE and aftermarket ECM/ECU injector drivers.
– Compatible with all known fuels, including alcohol and E85
– Fast response times, predictable flow down to 2ms, and maintain linear flow up to 8 BAR fuel pressure.
– Great for small-medium displacement engines making big power.
– Will support up to 550bhp @ 90% duty(3bar FP), and over 600bhp at 4bar. (Gasoline)

Applications:
– 2006-2011 Honda Civic Si (K20Z3)

Technical SPECS:
Coil Resistance: 12 Ohms (high-impedance will work with factory ECM/PCM drivers)
Spray Pattern: medium cone, (single orifice)
Electrical Connector: USCAR
Fitted with Viton upper and lower o-rings.
Static Flow Rate @ 43.5PSI (300kPa): 114 lb/hr = 14.36g/s = 1000cc/min
Overall Length: 71mm
Dimensions: 53.5mm o-ring seat to seat, 63mm o-ring centerline to centerline

What separates PFi from the rest? We use only state of the art ASNU test equipment, with additional add on hardware and software specifically designed for testing high flow injectors. This provides some of the most accurate flow data available. We invest heavily in our test equipment to be able to provide you with one of the best products available. All of our injectors are grouped in tightly flow matched sets, and supplied with comprehensive flow and offset data (dead times).