NEW 1000cc BOSCH EV14 Fuel Injectors Fits EVO X 4B11T using Radium fuel rail

4 – 1000cc BOSCH EV14 Fuel Injectors

Fits Mitsubishi 4B11T engine using Radium top feed fuel rail
________________________________________

Up for sale is a set of 4 NEW 1000cc/min BOSCH/PFi fuel injectors to fit the Mitsubishi 4B11T engine, using an existing Radium top feed fuel rail. This listing DOES NOT include the Radium fuel rail, only the injectors to use in conjunction with a Radium fuel rail. These are HIGH impedance so they are also compatible with all aftermarket ECU’s, as well as your factory ECU.  Great for high HP turbo applications, and/or those of you guys switching to E85. Simply plug in and tune!

What’s in the box:
– 4 x NEW Bosch EV14 Fuel injectors, fully assembled.
– 4 x Electrical Adapters – Direct fit, no splicing or soldering required
– Tuning information – Data offset chart (aka Dead time, latency, batter comp., lag times)

The BOSCH EV14 injector offers fast response times, and predictable flow down to 2ms. They also maintain linear flow up to 8bar fuel pressure. A perfect match for small to medium displacement engines making big power. These are compatible with ALL KNOWN FUELS. This set can support up to 600bhp @ 90% duty (3bar Fuel Pressure), and over 640bhp at 4bar.

This set has been custom milled from NEW, genuine Bosch cores, and flow matched to less than 2%. We match our injectors both statically, and dynamically for optimal performance, smooth idle, and easy tune-ability. Fuel discharge is through a single hole with a medium cone spray pattern for superior fuel atomization.

This set is covered by our best 2yr, unlimited mile warranty.

Applications:
– 08-15 Mitsubishi EVO X 4B11T utilizing Radium top feed fuel rail kit.

FLOW RATES & Specs:
Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Spray Pattern: Wide Split Cone, (single orifice)
Electrical Connector: USCAR
Fitted with Viton upper and lower o-rings.
Static Flow Rate (gasoline) @ 43.5PSI (300kPa): 95 lb/hr = 6.52g/s = 1000cc/min (900cc/min with n-Heptane)
Overall Length: 65.5mm
Dimensions: 48.5mm o-ring seat to seat, 53.5mm o-ring centerline to centerline
Acceptable fuels: This injector is compatible with all know fuels, including those containing MTBE.

If you have any questions please feel free to ask. We are here to help. Thanks for looking.