1000cc Bosch Fuel injectors for Honda Acura J-Series J32 J35 J37

Flow matched set of six (6) 1000cc/min Bosch fuel injectors, supplied with flow sheet and industry leading “Calibrated success” injector data for ease of tuning.

This set has been custom milled from NEW, genuine Bosch cores, and flow matched to less than 1.8% variance. Injectors are dynamically matched down to 1.5ms, to ensure even fuel delivery throughout the operating range. 

Horsepower limitations, estimate:
Assumes a return style fuel system, with boost referenced 1:1 FPR
Pump Gas – 85% duty cycle
808bhp @ 3bar/43.5psi fuel pressure
909bhp @ 4bar/58psi fuel pressure
E85 – 85% duty cycle
620bhp @ 3bar/43.5psi fuel pressure
690bhp @ 4bar/58psi fuel pressure

This set is covered by our best 2yr warranty, against electrical and mechanical defects.

APPLICATIONS :
Note: If using aftermarket fuel rails or different intake runners, fitment may require modification.

– J32A3 04-08 Acura TL (03′ models with J32a3 check for fitment)
– J35A5 03-06 MDX
– J35A6 05-06 Odyssey
– J35A7 0-5-10 Odyssey
– J35A9 06-08 Ridgeline, 06-08 Pilot
– J35A8 05-08 RL, 07-08 TL
– J35S1 04-07 Saturn Vue
– J35Y1/Y2 13-17 Accord
– J35Z1 06-08 Pilot
– J35Z2/Z3 08-12 Accord, 10-12 Crosstour, 13-18 RDX
– J35Z4 09-15 Pilot
– J35Z5 09-14 Ridgeline
– J35Z6 10-14 TSX, 09-14 TL (non-SH AWD)
– J35Z8 11-17 Odyssey
– J37A1/A2 07-13 MDX, 09-12 RL
– J37A4 09-12 TL (SH AWD)
– J37A5 10-13 ZDX

What’s included:
– 6  flow matched Bosch EV14 1000cc fuel injectors – fully assembled
– 6 x USCAR Pin-in style electrical connectors (direct fit electrical adapters are available in store, also)
– Calibration data for tuning purposes

Specs:
Coil Resistance: 12 Ohms (high-impedance injector – will work with all factory ECM/PCM injector drivers)
Spray Pattern: Medium Cone
Electrical Connector: EV14 USCAR (EV6)
Fitted with Viton upper and lower o-rings.
Static Flow Rate @ 43.5PSI, gasoline @ 52*C: 1000cc/min
Fuel Compatibility: All known pump and race fuels, including e85
Overall Length: 65.5mm
Dimensions: 48.5mm o-ring seat to seat, 53.5mm o-ring centerline to centerline

Find us on our socials!
Performance Fuel Injection – YouTube
Performance Fuel Injection (@performancefuelinjection) • Instagram photos and videos
Facebook

*Warranty covers replacement injector(s) only. In the event of an injector failure during the warranty period, the problematic injectors(s) will be replaced. Warranty does not cover labour or collateral damage costs. A 10 micron (or finer) fuel filter must be used in order to qualify for warranty. Failure to use a 10 micron (or finer) fuel filter may result in injector damage, which will void warranty.