6 – 1000cc Bosch EV14 fuel injectors
04+ Honda J32/J35/J37 fitment
ASNU Flow tested – 2yr Warranty _____________________________________________
Looking for a larger injector for your high power J-series? Up for sale is a set of 6 NEW 650cc/min BOSCH fuel injectors. These are a DIRECT FIT for rail and manifold, found in the applications listed below. They are HIGH impedance so they are compatible with all aftermarket ECU’s, as well as your factory ecu.
The BOSCH EV14 injector offers fast response times, and predictable flow down to 2ms. They also maintain linear flow up to 8bar fuel pressure. A perfect match for small to medium displacement engines making big power. These are compatible with ALL KNOWN FUELS. This set can support up to 900bhp @ 80% duty (3bar Fuel Pressure, Pump gas), and over 1000bhp at 4bar.
This set has been custom milled from NEW, genuine Bosch cores, and flow matched to less than 2%. We match our injectors both statically, and dynamically for optimal performance, smooth idle, and easy tune-ability. Fuel discharge is through a single hole with a medium cone spray pattern for superior fuel atomization.
This set is covered by our best 1yr warranty, against electrical and mechanical defects.
Each set is accompanied by a table with all the necessary tuning information(dead time, voltage offset, latency, etc).
APPLICATIONS- DIRECT FIT:
– 2004-2008 Acura TL (some 2003 models with J32a3)
– 2008-2012 Acura TL inc. Type-S (J35a4/z6/a8 & J37a4)
What’s included:
– 6 x Bosch EV14 650cc fuel injectors
– 6 x USCAR Pin-in style electrical connectors
– Tuning info
Specs:
Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Spray Pattern: Medium Cone
Electrical Connector: USCAR (New-style V=EV6 / Oval / LS2)
Fitted with Viton upper and lower o-rings.
Static Flow Rate @ 43.5PSI, gasoline @ 52*C: 1000cc/min
Overall Length: 65.5mm
Dimensions: 48.5mm o-ring seat to seat, 53.5mm o-ring centerline to centerline