4 x 1000cc BOSCH EV14 Fuel Injectors Fits 2008-2016 Mitsubishi Lancer EVO X NEW

4 – 1000cc BOSCH EV14 Fuel Injectors – DIRECT FIT!

08-15 Mitsubishi Lancer EVO X
________________________________________

Looking for a larger injector for your high power EVO X engine? Up for sale is a set of 4 NEW 1000cc/min BOSCH fuel injectors. These are a DIRECT FIT for the fuel rail and harness found in the applications below. They are HIGH impedance so they are also compatible with all aftermarket ECU’s, as well as your factory ECU.  Great for high HP turbo applications, and/or those of you guys switching to E85. Simply plug in and tune!

What’s in the box:
– 4 x NEW Bosch EV14 Fuel injectors, fully assembled.
– 4 x Direct fit electrical adapters (one piece design, no messy wires!)
– Tuning information – Data offset chart (aka Dead time, latency, batter comp., lag times)

The BOSCH EV14 injector offers fast response times, and predictable flow down to 2ms. They also maintain linear flow up to 8bar fuel pressure. A perfect match for small to medium displacement engines making big power. These are compatible with ALL KNOWN FUELS. This set can support up to 600bhp @ 90% duty (3bar Fuel Pressure), and over 640bhp at 4bar.

This set has been custom milled from NEW, genuine Bosch cores, and flow matched to less than 2%. We match our injectors both statically, and dynamically for optimal performance, smooth idle, and easy tune-ability. Fuel discharge is through a single hole with a medium cone spray pattern for superior fuel atomization.

This set is covered by our best 2yr, unlimited mile warranty.

Applications:
– 08-16 Mitsubishi EVO X (4B11T 2.0L turbo engine)
– 08′ Lancer Ralliart

FLOW RATES & Specs:
Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Spray Pattern: Wide Cone, (single orifice)
Electrical Connector: USCAR
Fitted with Viton upper and lower o-rings.
Static Flow Rate (gasoline) @ 43.5PSI (300kPa): 95 lb/hr = 6.52g/s = 1000cc/min (900cc/min with n-Heptane)
Overall Length: 65.5mm
Dimensions: 48.5mm o-ring seat to seat, 53.5mm o-ring centerline to centerline
Acceptable fuels: This injector is compatible with all know fuels, including those containing MTBE.

If you have any questions please feel free to ask. We are here to help. Thanks for looking.