4 – 30lb 315cc BOSCH Fuel injectors Audi Volkswagen 1.8T A4 Passat Jetta Golf K04

4 – 30lb/hr (315cc) BOSCH fuel injectors

ASNU serviced with WARRANTY

____________________________________________________________

Up for sale is a set of 4 – Bosch 30lb/315cc injectors. These are the BOSCH design III injectors that everyone is talking about. With fast response times and great atomization, these truely are a great choice for your injector upgrade. These are High Impedance injectors so they DO NOT require the use of a resistor box. These injectors utilize a 14mm upper and lower o-rings common among Domestic, and European applications.

These are a common upgrade for the Audi/VW 1.8T, and will work with many different aftermarket tunes for 300-330cc fuel injectors. These are a DIRECT FIT for the AUDI/VW engine with code AEB. They will fit the others listed below with the use of fuel rail spacers.

ACTUAL Flow rates:
– 30lb (315cc) @ 3bar – 43.5psi
– 33lb (345cc) @ 3.5bar – 50psi
– 36lb (380cc) @ 4bar – 58psi.

Applications:
AUDI
– 97-99.5 Audi A4 1.8T (AEB engine code)
– 02 A4 1.8T (AMB engine code) MUST USE RAIL SPACERS

VW:
– 97-99 Passat 1.8T (AEB engine code)
– 01 Passat 1.8T (AWM engine code) MUST USE RAIL SPACERS
– 00-04 Passat 1.8T (AMB engine code) MUST USE RAIL SPACERS
– 01′ Golf/Jetta 1.8T (AWW engine code) MUST USE RAIL SPACERS
– 00′ Golf/Jetta 1.8T (AWP engine code) MUST USE RAIL SPACERS

Will fit many other applications. Please contact us if you do not see your application listed.

___________________________________________

All of our injectors have undergone the following process on one of our ASNU diagnostic machines:
– Resistance and continuity checked
– Visually inspected to insure a quality platform
– Hand cleaned and degreased
– Ultrasonically cleaned and reversed flow cleaned
– Flow tested (static and dynamic) with spray pattern observed for consistency
– Drive simulation from 600-10000 RPM with spray pattern observed
– High pressure & low pressure Leak down tested
– New filter baskets, o-rings, and pintle caps installed
– Machine polished
– Re-inspected & prepped for shipping