4 – 1000cc Bosch EV14 Fuel Injectors WITH adapters!
ASNU flow matched – W/ 1yr Warranty!
__________________________________________
Looking for a larger, Direct fit. injector for your high powered DSM 4G63 turbo engine? Up for sale is a set of four(4) New BOSCH EV14 – 1000cc/min fuel injectors. These are HIGH IMPEDANCE so you must remove or bypass your factory resistor box! Also included are the proper USCAR to EV1 electrical adapters making these a DIRECT FIT for the OEM harness.
These BOSCH EV14 injectors are compatible with all known fuels, including alcohol and E85. They offer fast response times, predictable flow down to 2ms, and maintain linear flow up to 8 BAR fuel pressure. Great for small-medium displacement engines making big power. This set can support up to 600bhp @ 90% duty(3bar FP), and over 680bhp at 4bar.
This set is custom milled from NEW Bosch cores and flow matched to less than 2% (static & dynamic) for optimal idle, and drivability. Fuel discharge is through a single hole with a medium cone spray pattern for superior fuel atomization. These injectors are covered by our best 2yr unlimited mile warranty.
We supply all the necessary tuning information for these injectors.
Applications:
Mitsubishi:
– Lancer Evolution 1,2,3,4,5,6,7,8, & 9 – 4G63 Turbo
– 90-99 Eclipse 4G63 Turbo
– 88-92 Galant VR-4 4G63 Turbo
Eagle:
– 90-98 Talon 4G63 Turbo
Plymouth:
– 90-94 Plymouth Laser 4G63 Turbo
Please inquire if you do not see your application, we do not have them all listed.
SPECS:
Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Spray Pattern: Wide Split Cone, (single orifice)
Electrical Connector: USCAR (New-style V=EV6 / Oval / LS2)
Fitted with Viton upper and lower o-rings.
Static Flow Rate @ 43.5PSI (300kPa): 95 lb/hr = 6.52g/s = 1000cc/min
Overall Length: 65.5mm
Dimensions: 48.5mm o-ring seat to seat, 53.5mm o-ring centerline to centerline