4 – 1000cc BOSCH EV14 Fuel Injectors Suzuki Hayabusa GSXR1000 GSXR750 GSXR600

4 – 1000cc BOSCH EV14 Fuel Injectors DIRECT FIT  ________________________________________

Looking for a larger injector for your high power Suzuki bike? Up for sale is a set of 4 NEW 1000cc/min BOSCH fuel injectors, with wireless USCAR to Hayabusa electrical adapters. That’s right, WIRELESS, one piece electrical adapters. No other vendor offers these. These are a DIRECT FIT for the fuel rail and harness found in the applications below. They are HIGH impedance so they are also compatible with all aftermarket ECU’s, as well as your factory ECU.  Great for high HP turbo applications, and/or those of you guys switching to E85.

The BOSCH EV14 injector offers fast response times, and predictable flow down to 2ms. They also maintain linear flow up to 8bar fuel pressure. A perfect match for small to medium displacement engines making big power. These are compatible with ALL KNOWN FUELS. This set can support up to 540bhp @ 90% duty (3bar Fuel Pressure), and over 590bhp at 4bar.

This set has been custom milled from NEW, genuine Bosch cores, and flow matched to less than 2%. We match our injectors both statically, and dynamically for optimal performance, smooth idle, and easy tune-ability. Each set is accompanied by a table with all the necessary tuning information(dead time, voltage offset, latency, etc). Fuel discharge is through a single hole with a medium cone spray pattern for superior fuel atomization

Each set is accompanied by a table with all the necessary tuning information (dead time, voltage offset, latency, etc).  

Applications:
99-07 GSX 1300R Hayabusa
01-02 GSXR 1000
00-03 GSXR 750
01-03 GSXR 600

FLOW RATES & Specs:
Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Spray Pattern: Wide Split Cone, (single orifice)
Electrical Connector: USCAR
Fitted with Viton upper and lower o-rings.
Static Flow Rate (gasoline) @ 43.5PSI (300kPa): 95 lb/hr = 6.52g/s = 1000cc/min (900cc/min with n-Heptane)
Overall Length: 65.5mm
Dimensions: 48.5mm o-ring seat to seat, 53.5mm o-ring centerline to centerline

Rest Assured:
We test fit all of our injectors for proper fitment, and race what we sell! We don’t copy others designs in hopes that they work. Our pictures do not always depict the exact parts you will receive. This is in an effort to avoid plagiarism. 

If you have any questions please feel free to ask. We are here to help. Thanks for looking.