650cc Bosch EV14 Fuel Injectors Volvo 2.5 Turbo C30 C70 S40 S60 V50 2.5T T5

5 – 650cc Bosch EV14 fuel injectors

 with 1yr Warranty!
___________________________________________

Looking for a larger injector for your high power Volvo 2.5T? Up for sale is a set of 5 – NEW 650cc/min BOSCH fuel injectors. These are a DIRECT FIT for the fuel rail and harness found in the applications below. They are HIGH impedance so they are also compatible with all aftermarket ECU’s, as well as your factory ECU. Great for high HP turbo applications, and/or those of you guys switching to E85.

These are UNMODIFIED Bosch injectors, with the multi-hole orifice, for superior atomization.

The BOSCH EV14 injector offers fast response times, and predictable flow down to 2ms. They also maintain linear flow up to 8bar fuel pressure. A perfect match for small to medium displacement engines making big power. These are compatible with ALL KNOWN FUELS. This set can support up to 480bhp @ 90% duty (3bar Fuel Pressure), and over 520bhp at 4bar.

Each set is accompanied by a table with all the necessary tuning information(dead time, voltage offset, latency, etc).

Applications:
2007 Volvo C3 (B5254T3)
2008-2013 Volvo C30 (B5254T7)
2006-2007 Volvo C70 (B5254T3)
2008-2013 Volvo C70 (B5254T7)
2004-2007 Volvo S40 (B5254T3)
2008-2012 Volvo S40 (B5254T7)
2012 Volvo S60 (B5254T5)
2013-2014 Volvo S60 (B5254T12)
2005-2007 Volvo V50 (B5254T3)
2008-2012 Volvo V50 (B5254T7)

FLOW RATES & Specs:
Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Spray Pattern: Wide Split Cone, (single orifice)
Electrical Connector: USCAR
Fitted with Viton upper and lower o-rings.
Static Flow Rate (gasoline) @ 43.5PSI (300kPa): 95 lb/hr = 6.52g/s = 1000cc/min (900cc/min with n-Heptane)
Overall Length: 65.5mm
Dimensions: 48.5mm o-ring seat to seat, 53.5mm o-ring centerline to centerline