4 – 320 BOSCH fuel injectors
ASNU Serviced W/ 1yr Warranty!
___________________________________________
Up for auction is a set of 4 high performance 320cc (30lb) fuel injectors. These are genuine BOSCH injectors, modified to fit the applications listed below. These are HIGH IMPEDANCE so they DO NOT require the use of a resistor box. These are a direct fit for the fuel rail, manifold, and electrical harness.
The injectors are intended as an upgrade in modified engines, and are not a factory replacement.
These are BOSCH design 3 injectors, known for their laser cut 4-hole discharge. They have superior fuel atomization which results in smoother idle, lower emissions, easier tuning, better throttle response, and more power.
At stock fuel pressure (43.5psi/3bar) these injectors will support engines making up to 200hp. At 58psi/4bar these injectors will support engines making up to 250hp.
FLOW RATES:
320cc @ 3bar/43.5psi
460cc @ 3.8bar/55psi
400cc @ 4bar/58psi
Some applications include:
Mitsubishi |
Galant |
HG, HH |
4G63 |
2.0L |
4 |
88-92 |
Mitsubishi |
Lancer |
CB GSR |
4G61 |
1.6L |
4 |
90-92 |
Mitsubishi |
Lancer |
CC |
4G93 |
1.8L |
4 |
92-96 |
Mitsubishi |
Lancer |
CE Wagon Only |
4G93 |
1.8L |
4 |
95-03 |
Please inquire if you do not see your application, we do not have them all listed.
_________________________________________
All of our injectors have undergone the following process on one of our ASNU diagnostic machines:
– Resistance and continuity checked
– Visually inspected to insure a quality platform
– Hand cleaned and degreased
– Ultrasonically cleaned and reversed flow cleaned
– Flow tested (static and dynamic) with spray pattern observed for consistency
– Drive simulation from 600-10000 RPM with spray pattern observed
– High pressure & low pressure Leak down tested
– New filter baskets, o-rings, and pintle caps installed
– Re-inspected & prepped for shipping